COMPANY PROFILE
B-Tohin Machine (Jiangsu) Co., Ltd., a foreign-funded enterprise, was established in 1994 with a registered capital of 120 million yuan. located in Yixing Environmental Science and Technology Industrial Park, China. It is mainly engaged in the production and sales of Roots blowers, rotary blowers, single-stage high-speed centrifugal blowers, multi-stage centrifugal blowers, air bearing turbo blower, maglev turbo blower, screw blowers, fiberglass blowers, stainless steel blowers, MVR blowers, vacuum pumps, water pumps and other products, as well as the distribution of ShinMaywa pumps imported from Japan. The products are used in environmental protection water treatment, building materials cement, chemical industry, electric power, petroleum, steel, metallurgy, mining, printing and dyeing, grain transportation, new energy and new materials and other industries, the products are sold all over the country, and exported to many countries and regions. At present, there are more than 310 employees, the annual sales value of 450 million yuan, the production of various types of blowers about 30,000 sets.
Passed the certification of ISO9001 & ISO 14001:2400, the company also has been certified as "High & New-tech Enterprises of Jiangsu Province", "Pneumatic Technology Research Center of Jiangsu Province", "Well-known Trademark of China", "Famous Trademark of Jiangsu Province"and "Eco-friendly Products", and it has achieved many patents of state level and National Torch Plan Projects.In successive seven years, B-Tohin has been honored as "Favorite Brand of Users in Water Treatment Industry" and "Leading Enterprise in Chinese Roots Blower Industry, and in 2014, it has been ranked "2014 Top 10 Brands in Chinese Water Industry".
Main Characteristics
Optimized lobe curve is adopted for reducing blower'sinternal leakage, improving blower's efficiency and reducingrunning temperature.
Double fuel tank design, fully lubricate the driving endbearing, improve the lubrication ability, make the fan moresuitable for high speed operation.
Adopt the deep groove ball bearing with high precision andsmall friction coefficient, low running noise, prolong the servicelife..
Double fuel tank design, fully lubricate the driving endbearing, improve the lubrication ability, make the fan moresuitable for high speed operation.
Blower Working Principle
Roots Blower s a cubage blower and it discharges a fixed amount of air in proortion to its rotation speed. Every rotation. thereis two lobes to finish three times absorbing and discharging ar.Compared with two lobes blower, it is ofless air pulses, smaller loadchange,higher strength.lower noise and yibration.
Two parallel shafts have three lobes each , all the lobes keep small clearance with each other and housing inside . Every lobesrotation . a certain air will be absorbed at inlet and transferred from the housing inside surface to blower's discharge port.Two shafts will be turned by the timing gears, no any touching between lobes , so it can be turned at high speed without anylubrication inside. It has the following characteristics : Simply configuration ; running smoothly ; good performance stabilization . lhas been widely applied in various industries.
Method Of Reading Performance Sheet
1.The inlet airflow in the sheet based on the standard condition.
2.Normally there is ways to show the airflow value :
(1)standard condition airflow-Airflow at 20Celsius degree :absolute pressure is 760mmHg (101.3KPa):comparative humidity is 65%.
(2) Inlet airflow-Airflow upon to the temperature and humidity at inlet.
(3) Base standard condition airflow---Airflow of dry gas at 0 celsius degree , absolute pressure is 760mmHg (101.3KPa)We can convert each other as follows:
If Ol converts to O2O2=O1xP1/P2xT2/T1O1:Airflow (m'/min) based on absolute pressure P2 (mmH,0), absolute temperature T1(k)02: Airflow (m'/min)based on absolute pressure P2 (mmH,0), absolute temperature T2 (k)
3.There are some duplications when you choose the model, if being for the economical point, vou can choose the samllmodel with the same parameter, or you can choose the big one according to the noise and longevity points.The airflow based on the certain pressure can be changed within 5%.
BY Type Performance Parameters Sheet
Outline Dimensions Of BY Type Blower
Outline Dimensions Sheet
Special Accessory
1.Working principle
This valve is mainly used in the pipeline for blower.compressor and screw type blower. When blower start, the airwill flow through the valve, and the blower will workingwithout load, after a while, the valve will close because thepressure difference in the pipeline and out, so it realize startwithout load for the blower, and can avoid impacting theequipment and motor.
2.Main characteristics
(1) Being mechanical structure and reasonable design, withoutconk out.
(2) There is no need for bypass and electric executive systemBeing low cost.
(3) It substitute for the security valve, and protect startup insevere condition.
(4) Being easy mounting and maintenance
Qualification and Honor
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During the warranty period, replace the damaged parts for free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure continuous safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment
A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60, 000 hours.
C- Service life of bearing is more than 50, 000 hours.
D- Service life of gear is more than 60, 000 hours.
4. What is your terms of packing?
A: Generally, we pack our goods in Fumigation Free Plywood Case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality?
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6. What are your terms of payment?
1. TT 30% AS THE ADVANCE PAYMENT AND TT 70% AFTER INSPECTION BEFORE SHIPPING.
2.100% IRREVOCABLE L/C AT STGHT.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}